Printer friendly version of 21.07.2017
print
http://www.nemcometals.com/internet/content/nemco/en/products/strip/delivery_formats/traverse_wound_strip/gespultebnder_2_lieferformen.jsp

Traverse-wound strip

Traverse-wound strip consists of coils which are welded together and then wound onto a drum or core. Depending on the strip width, considerably longer strip lengths can be achieved than with individual coils. The excellent quality of the welds allows the operator to continuously run the strip through the stamping tools without causing disruption, thus reducing down time. Depending on the design, the stamped parts located at the weld seam may not be fully suitable for the intended function, therefore the welds can be marked in colour if required.

We draw a distinction between drums with side flanges and those without. Depending on the type of drum, the net weight of the traverse-wound strip is between 75 and 1000 kg.

The flangeless drums are least expensive, since the drum centres are made from cardboard. This is particularly environmentally friendly, since they can be returned together with the stamping scrap.

Drum / Core Inner diameter Drum width (without flanges)
Cardboard (no flange) 300/ 400mm up to 360mm
Drums (wooden, with flange)
S01A 91mm 290mm
S02 300mm 150mm
S03 300mm 250mm
S04 130mm 270mm
Drum (steel, with flange)
Nemco Standard 127mm 290mm

Please contact our rolled sales team with your requirements.

Current metal prices

Officials (Prompt) 07/20/2017
Cu (Settlement) 5,930.00 in USD/t
Zn (Settlement) 2,737.00 in USD/t
EUR (Bid) 1.14535 USD
All details and charts

Contact

nemco metals international ltd
Pennard Close,
Brackmills Industrial Estate,
Northampton,
NN4 7BE.

General sales enquiries
Tel: (+44) 01604 666-100

Rolled product team
Tel: (+44) 01604 666-101

Drawn product team
Tel: (+44) 01604 666-102

Facsimile
(+44) 01604 768-414

E-mail